If you deal with plumbing clogs on a regular basis, you might find yourself struggling with bent wire hangers, chemical drain cleaner, and unfamiliar pipes. Unfortunately, unless you are a trained professional, all of your efforts might be in vain. Most people don't realize it, but it is possible to damage your plumbing by making a few missteps. If you use the wrong chemicals or you push a little too hard, you might end up dealing with damaged pipes or your clogging problem could get worse. Fortunately, you might be able to use this blog to help you to keep your plumbing flowing smoothly.
Water lines are vulnerable to damage due to weather or being because of accidents when doing home improvements. When a pipe has burst, or been punctured, quick actions will help to minimize the damage. It is important to turn off the water, but you will also want to remove materials and get water out quickly. Have you had a problem with a water line and want to know what you need to do to get the problem under control? Here are three simple tips to help you take quick action and reduce the damage water can cause in your home:
1. Turn Off the Water Service and Open Faucets to Stop Water Flow
Getting the water stopped is the priority when you find a water pipe has been damaged. First, cut off the water at the main service line going to your home. Go inside your home and open all the faucets and flush all the toilets. Leave the faucets open until there is no water coming out of them. Opening plumbing fixtures will allow the water in the lines to drain and prevent more water going to the damaged area.
2. Remove Absorbent Building Materials and Expose the Damaged Water Line
When you have a series water line problem like a burst pipe, some building materials like drywall and carpet will need to be removed. First, if you have absorbent flooring like carpet, remove the trim around the edges or removes and pull it up. With carpet removed, locate the area of drywall with the most damage and start cutting a big square out. Cut the drywall larger than the damage to make sure there is no water damage left. You will have to replace the drywall, but you may be able to save carpet by cleaning it and having it reinstalled.
3. How to Pump the Water Out Without a Submersible Pump or Other Equipment
To get standing water out of a home, plumbers and restoration contractors use special submersible pumps. Not every household has the type of pump needed to get the water out. To start pumping water out, use a hose from the garden to siphon the water out. If you have a shop vacuum in the garage or a shed, this can also help to get any water that has puddled in areas that you cannot siphon out. Use old dirty towels to soak up the remainder of the moisture.
Reacting to the problem quickly will prevent water from getting to other areas and causing more damage. Isolate the problem and contact a plumbing repair service like Bilz Plumbing & Mechanical Inc to help with the repairs to get your home back in order.
Share19 May 2017
