If you deal with plumbing clogs on a regular basis, you might find yourself struggling with bent wire hangers, chemical drain cleaner, and unfamiliar pipes. Unfortunately, unless you are a trained professional, all of your efforts might be in vain. Most people don't realize it, but it is possible to damage your plumbing by making a few missteps. If you use the wrong chemicals or you push a little too hard, you might end up dealing with damaged pipes or your clogging problem could get worse. Fortunately, you might be able to use this blog to help you to keep your plumbing flowing smoothly.
Hot water is indispensable in your everyday life, turning into a major concern when your hot water tank exhibits issues. Ensuring the seamless functioning of your hot water supply remains paramount. It's frustrating to wake up and find out that your hot water tank isn't working and you need to take a cold shower. This can be an emergency, especially during the winter season. Fortunately, there are several things you can do when your hot water tank stops working.
1. Check the Power Supply
The first thing to do when your hot water tank isn't working is to check the power supply. Sometimes, the cause of the problem is as simple as a tripped circuit breaker or a blown fuse. If you're unsure about how to proceed, it's advisable to refer to your owner's manual or seek assistance from a qualified electrician to ensure a safe and proper execution of the task.
2. Inspect the Thermostat
If there's no power problem and you still don't have hot water, the next step is to check the thermostat. You'll find it on the unit's outside, and it may be covered with a protective panel. Remove the panel and check the thermostat to see if it's set to the recommended temperature. If it's not, adjust it accordingly.
3. Check the Pilot Light
If you have a gas-powered hot water tank, the pilot light may have gone out, causing the hot water tank to stop working. You'll need to relight it manually, following the instructions in the owner's manual. If you're not comfortable doing this, seek assistance from a professional.
4. Drain the Tank
If you've tried all the solutions above and still can't get hot water, it's time to drain the hot water tank. As time progresses, sediment and mineral deposits gradually accumulate at the bottom of the tank, impeding its proper functionality. You can do this by turning off the power, closing the cold water valve, and opening the hot water valve. Once the tank is empty, turn the water supply back on, turn the power back on, and let the tank refill.
5. Call a Professional
If none of these steps worked and you still don't have hot water, it's best to call a professional. At times, the magnitude of a problem may surpass one's ability to address it, and it is not prudent to invest time and effort in attempting to resolve it independently. A professional plumber or technician can assess and fix the problem in no time, ensuring you have hot water back in your taps.
A non-functioning hot water tank can be an emergency in some cases. However, you can fix it by following the steps above. Always start by checking the power supply, inspecting the thermostat, and relighting the pilot light if you have a gas-powered tank. Additionally, drain the tank, and if none of these solutions work, call a professional. Remember that sometimes some questions are best left to the hot water tank installation experts.
Share12 September 2023
