If you deal with plumbing clogs on a regular basis, you might find yourself struggling with bent wire hangers, chemical drain cleaner, and unfamiliar pipes. Unfortunately, unless you are a trained professional, all of your efforts might be in vain. Most people don't realize it, but it is possible to damage your plumbing by making a few missteps. If you use the wrong chemicals or you push a little too hard, you might end up dealing with damaged pipes or your clogging problem could get worse. Fortunately, you might be able to use this blog to help you to keep your plumbing flowing smoothly.
During the winter months, most people rely on their home's heating system to provide warmth and comfort when it is freezing outside. While heaters are widely used, many people don't think about them very often as long as they are working well. However, when a heater stops working properly and exhibits problems, it can be quite alarming, especially during a winter storm or an extreme cold spell. Continue reading to learn more about some of the common issues a residential heater can have:
Dirty Air Filter
One of the most common heater issues is also one of the easiest to fix. Dirty and clogged air filters can cause a lot of problems since a dirty air filter blocks air flow which makes it more difficult for a heater to force warm air into a home. If you want to avoid this problem, the best thing you can do is change your air filter before you begin to use your heater in the fall. Throughout the winter season, check your air filter regularly and change it if you notice that it is full of dirt and debris.
If your home's thermostat is not working properly, your heater will not receive the message that it needs to turn on to provide heat. Luckily, replacing a broken thermostat is a relatively easy job and most homeowners can do it on their own. If you discover that you have a broken thermostat, consider replacing it with a programmable thermostat so you can control when your heater runs and lower your heating bill without sacrificing comfort.
Damaged Internal Components
As a heater ages, some of the components may begin to wear down and cease to work properly. In most cases, strange sounds while the heater is running, such as squeaking, screeching, and grinding, indicate a problem with the inner components of a heater. Don't ignore strange sounds when your heater is running-- your best bet is to have the issue diagnosed and repaired by an experienced heating contractor.
Bad Limit Switch
A limit switch contains a sensor that measures the temperature of the air inside the heat exchanger. When the proper temperature is reached, the limit switch turns on the blower so the warm air is forced through the air vents. If the limit switch goes bad and needs to be replaced, you may notice that the blower on your home's heating system runs continuously.
To learn more, contact a company like Bill Rhiner's Plumbing, Heating & Cooling.Share
10 March 2018